The Netbell-K-M2 is a compact, self-contained design that was created with ease-of-use in mind. The system is built on a TCP/IP platform with a built-in web server, which allows users to access, control, and schedule the bell accurately and effectively over the network from any computer. All software and mounting hardware required for installation and operation is included. With the easy-to-use bell schedule software, users can easily add event schedules with different ringing duration for different events or import/export their existing data using a simple text format. It’s ready to go out of the box, just pull the completely assembled bell out of its packaging, connect power and network with provided cables; it can be installed anywhere on the network, and does not require a direct connection to a PC. Now it is easy for schools, factories to have a fully automated web-based timed alert system for signaling shift changes, general alarm and breaks in areas of high ambient noise levels.

Intended to be an all-in-one solution, the Netbell-K-M2 features a high quality 6 inch high output bell (86dB) and a completely wired web-based bell controller installed within a NEMA-rated box. There are two additional relay outputs with a CP connector that provides quick connect/disconnect, for connecting two external certified bells if you have a larger area needs to be covered (the external bells are not included, purchased separately). To add the external bells to the Netbell-K is incredibly easy, just connect the external bell kit with the provided cable, plug the bell cable to the Netbell-K second bell CP connector, you are all set. The external bells can be connected at 250 feet away with 18AWG cable (500 feet with 16AWG cable) to the Netbell-K server. With the digital input you can wire an external switch for ringing bells manually in the events of emergency.